Atmel SAM L22 Xplained Pro, Руководство пользователя

Страница: 21 / 47

EXT5 pin SAM L22 pin Function Shared functionality
44 [COM5] PA08 SLCD/ LP[11] EXT3
45 [COM6] PA09 SLCD/ LP[12] EXT3
46 [COM7] PA10 SLCD/ LP[13] EXT3
47 [Backlight V
+] - VCC_P3V3
48 [Backlight
V-] - GND
49 [Backlight
CTRL] PC27 TC3/WO[1] User LED0
50 [ID] - Xplained Pro ID Communication line to ID chip on extension board
51 [GND] - GND
4.2.3. Arduino Connector Footprint
SAM L22 Xplained Pro implements Arduino shield connectors footprints based on the Arduino Uno . All
references to Arduino pin names are taken from the official Arduino schematics of the Arduino Uno.
Info: Note that all pins do not have the exact same functionality as on the Arduino Uno on the
shield connectors. Each shield should be checked for compatibility before it is connected.
Table 4-5. J902 - Power
J902 pin SAM L22
pin Arduino pin name Function Shared functionality
1 - RFU - -
2 - IOREF VCC_TARGET_P3V3 -
3 RESETN RESET TARGET_RESET Shield , EDBG, and
Cortex
®
Debug
4 - 3.3V VCC_TARGET_P3V3 -
5 - 5V VCC_P5V0 -
6 - GND GND -
7 - GND GND -
8 - VIN VCC_EXT_P5V0 -
Atmel SAM L22 Xplained Pro [USER GUIDE]
Atmel-42474B-SAM-L22-Xplained-Pro_User Guide-12/2015
21