Atmel OLED1 Xplained Pro, Руководство пользователя

Страница: 8 / 14

Pin Number Function Description
12 NC
13 NC
14 NC
15 DISPLAY_SS OLED display slave select, active low
16 SPI MOSI MOSI signal SPI connected to OLED display
17 NC
18 SPI SCK Clock signal for SPI connected to OLED display
19 GND Ground
20 VCC Target supply voltage
Related Links
Xplained Pro Standard Extension Header on page 5
4.3. Peripherals
4.3.1. LEDs
There are three yellow LEDs available on OLED1 Xplained Pro. The LEDs can be activated by driving the
connected I/O line low.
Table 4-3. LED Connections
Pin on EXT connector Silk screen marking
7 LED1
8 LED2
6 LED3
4.3.2. Push Buttons
There are three push buttons available on OLED1 Xplained Pro. When a button is pushed the
corresponding I/O pin is connected to ground. There are no external pull-up resistors on OLED1 Xplained
Pro, so internal pull-up resistors have to be enabled in the target microcontroller.
Info: Remember to enable internal pull-up resistors in the target device to get a defined
electrical level on the I/O lines connected to the buttons.
Table 4-4. Push Buttons Connections
Pin on EXT connector Silk screen marking
9 BUTTON1
3 BUTTON2
4 BUTTON3
Atmel OLED1 Xplained Pro [USER GUIDE]
Atmel-42077C-OLED1-Xplained-Pro-Hardware_User Guide-03/2016
8