Atmel ATA8520-EK1-E Скачать руководство пользователя страница 1

9373E-AUTO-11/15

Features

User guide for the evaluation kit ATA8520-EK1-E and extension boards 
ATA8520-EK2-E and ATA8520-EK3-E

This kit demonstrates a Flash application with the 

ATA8520-EK1-E evaluation kit:
with the Atmel

®

 SIGFOX

 ATA8520D V1.3 transceiver device and an Atmel 

ATmega328P AVR

®

 microcontroller with AT30TS75A temperature sensor as a 

battery-powered kit for standalone operation

ATA8520-EK2-E and 

ATA8520-EK3-E 

extension boards:

Includes Atmel SIGFOX ATA8520D V1.3 transceiver device with an AT30TS75A 
temperature monitoring device. An additional MCU application development kit, 
i.e. Xplained mini or Arduino UNO is required.

Description

This user guide describes an evaluation kit and the extension boards for a SIGFOX 
application. This application uses an Atmel ATmega328P AVR microcontroller to 
read out an AT30TS75A temperature sensor using the built-in TWI connection and controls 
the RF telegram transmission using the SIGFOX ATA8520D V1.3 transceiver device. This 
application requires a SIGFOX base station infrastructure to capture the RF telegram and 
supply payload data at the SIGFOX back end of the SIGFOX Cloud. For more information 
on operating the SIGFOX network and SIGFOX Cloud, see 

http://www.sigfox.com

 

information.

The evaluation and development kit tool packs are available for download from the Atmel 
website: 

http://www.atmel.com/devices/ATA8520.aspx

.

 These tool packs include

The ATAN0054 quick start guide for the kit and the Atmel ATAN0104 user guide 

The schematic, layout and Gerber data for the ATAB0101A PCB

The source code for the Atmel ATmega328P as an Atmel Studio 6 project

The Atmel ATA8520D SIGFOX transceiver is a SIGFOX-certified device which includes the 
complete SIGFOX protocol stack to operate in the SIGFOX network within the 868MHz 
ISM band. The device is controlled from any host MCU using the SPI commands as 
described in the datasheet [1]. Included in the tool pack is a ATA8520D library as C source 
code for the SPI commands.

APPLICATION NOTE

User Guide for the Evaluation Kit ATA8520-EK1-E  and the

ATA8520-EK2-E and ATA8520-EK3-E Extension Boards

ATAN0104

Содержание ATA8520-EK1-E




















Отзывы: