Atmel AVR8015
31
32185A-AVR-01/12
4.7 Task 7: Design validation
4.7.1 Introduction
The design validation wizard is a tool used to validate the design by measuring and
logging values received from the kit.
4.7.2 Using the design validation wizard
1. Connect the kit and start a touch debug session.
2. Launch Atmel QTouch Studio and start the design validation wizard from the
Tools menu.
Figure 4-31.
Selecting design validation wizard.
3. The design validation wizard opens.
Figure 4-32.
Design validation wizard.
4. On the first page, it will ask you to click Measure button without touching any of
the sensors. Follow the instructions.
5. Click Next and follow subsequent instructions.
