Atmel AT18F-DK3, Руководство пользователя

Страница: 4 / 23

Introduction
1-2 AT18F-DK3 Configurator Development Kit User Guide
3685A–CNFG–04/08
Notes: 1. Both VCCIO and VCCINT must be set to 3.3V while programming the AT18F Series
devices. When changing the VCCIO or VCCINT jumper position, the power of the
ATF15xx-DK3 must be turned OFF.
2. These features are not intended to be used for the AT18F Series devices on this board.
They are intended to be used for the Atmel ATF15xx CPLDs when a different CPLD
Socket Adapter Board is used with the ATF15xx-DK3 Base Board.
1.2.2 JTAG ISP Download Cable
„ JTAG ISP Download Cable (Atmel JTAG ISP MV Cable V6.0) for PC Parallel Printer (LPT) Port
1.2.3 JTAG Configurator Programming System (JCPS) Software
„ Atmel JCPS software can be downloaded from Atmel web site at:
– http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4278
1.3 Supported Devices
The Atmel AT18F-DK3 Programming Kit supports the following device types.
„ AT18F010-30XU
„ AT18F002-30XU
„ AT18F040-30XU
„ AT18F080-30XU
1.4 System Requirements
The minimum hardware and software requirements to program an AT18F Series Configurators on the
AT18F-DK3 Programming Kit through the Atmel JTAG Configurator Programming System (JCPS) Soft-
ware are:
„ Pentium
®
or Pentium Compatible Microprocessor-based Computer
„ Windows XP,
®
Windows 98, Windows NT
®
4.0, or Windows
®
2000
„ 64 Mbytes of RAM
„ 200 Mbytes of Free Hard Disk Space
„ Windows Supported Mouse
„ Available Parallel Printer (LPT) Port
„ 9V DC Power Supply with 500 mA of Supply Current
„ SVGA Monitor (800 x 600 Resolution)
1.5 Ordering Information
Part Number Description
ATF18F-DK3 Atmel AT18F Series Configurator Programming Kit