AT04357 RCB256RFR2-XPRO User Guide [USER GUIDE]
TBDA-MCU-09/2013
5
2. Start the "Bootloader PC tool" provided in the "Wireless Library hex" extension
3. Set "Connection" to Serial and "Port" to the COM port number
4. Configure the serial port settings as (click symbol at the right of Port setting)
5. "Select srec file", the file have to be of SREC format.
Atmel Studio output files can be of SREC format
6. Deselect EEPROM erase if not required.
7. Click "Upload"
8. Press the HW reset button (SW1) on the device if requested. The Bootloader PC tool will be waiting for
approximately 30 seconds for the button to be released. If this does not happen, programming will be
aborted.
9. Exit the GUI and reset the board - your new application should be up and running.
How to install the "Bootloader PC tool"
How to install the Bootloader PC GUI tool
1. Run the "Bootloader_PC_Tool_Setup_...exe" provided in the "Atmel AVR2054 Serial Bootloader" extension
from the Extension Gallery and complete the installation.
2. The Bootloader PC Tool is now available in the Atmel program folder
1.6
Available example code
SW examples provided for ATmega256RFR2 in Atmel Studio.
