AT-OMNI-121 / AT-OMNI-122
101
Advanced Operation
During use, the decoder can be switched to another multicast stream. However, if the decoder encounters a
missing stream, during the switch and when redundancy is enabled, then this will cause the decoder to automatically
failover to the multicast source configured as the backup. To prevent the decoder from automatically making the
redundancy switch, when redundancy is enabled, a grace period can be entered. By default, the grace period is set
to 0 seconds. If set to 0 seconds, automatic failover will occur if the stream is interrupted, for any reason. Refer to
Configuring Redundant Streams (page 54)
for more information on enabling or disabling redundancy.
3.
Locate the
Change grace period
field.
4.
Enter the desired value, in seconds. By default, this value is set to 0.
5.
Click the
Save
button, at the bottom of the
Output
section.
1.
Login to AMS. Refer to
Accessing Decoders in AMS (page 19)
2.
Click
HDMI OUTPUT
in the menu bar.
Redundancy Grace Period
