
AT-UHD-HDVS-300-KIT
17
Basic Operation
USB Modes
The AT-UHD-HDVS-300-TX provides three different USB modes:
Follow Video
,
Follow USB
, and
Manual
.
Each mode provides different method of controlling USB, based on how the system is connected. All three modes
will be covered in this section.
This mode is the default setting of the The AT-UHD-HDVS-300-TX. In
Follow Video
mode, each video input can be
assigned to either
USB 1
or
USB 2
host ports. This mode locks the USB host device to the desired video port. In
this way, the video source will have have access to all connected USB device, each time video switching occurs.
The AT-UHD-HDVS-300-TX has two USB host ports:
USB 1
and
USB 2
. Before using
Follow Video
mode, make
sure that each input is assigned to the desired USB host port.
Follow Video
AT-UHD-HDVS-300-TX
HDMI 1
POWER
INPUT
V
V
HDMI 2
VGA
DP
HDMI - RX
USB 2
USB 1
AUDIO
VGA IN
DP IN 4
USB HUB
HDBaseT OUT
RS-232
RX TX
LAN
HDMI IN 2
HDMI IN 1
USB
USB
1.
Connect the host computers to the desired USB host port.
2.
Launch a web browser and login to the web GUI. The factory-default username and password are listed below:
Username:
root
Password:
Atlona
3. Click
Setting
in the side menu bar.
4.
Locate the
USB Host
section. The
Follow Video
radio button should already be enabled. The factory-default
USB Host
assignments for Input 1 through Input 5 are as follows: