Three-Input Switcher for HDMI and
VGA Sources with Automatic Display
Control and Ethernet-Enabled
HDBaseT Output
The Atlona AT-HDVS-200-TX-PSK is a 3×1 switcher with two HDMI inputs, a VGA input with audio,
and an HDBaseT output. Video signals up to 4K/UHD @ 60 Hz with 4:2:0 chroma subsampling,
plus embedded audio and control signals can be transmitted up to 330 feet (100 meters). The
two-channel audio input can be assigned to any of the video inputs and embedded for HDBaseT
transmission. The AT-HDVS-200-TX-PSK is identical to the AT-HDVS-200-TX, with the addition
of local powering capability and an external power supply. This makes it ideal for extending AV
and control directly to a projector with an HDBaseT input. The AT-HDVS-200-TX-PSK can serve
as the central component of a small, automated AV system by sending control commands to the
projector via RS-232 or Ethernet, and through automatic input selection. With automatic display
control, the AT-HDVS-200-TX-PSK powers the projector on or off whenever a source is connected
or disconnected from the unit.
• 1 x AT-HDVS-200-TX-PSK
• 1 x 48V power supply
• 1 x Captive screw connector
(3 pin: RS-232)
• 1 x Pair of mounting brackets
• 1 x Installation Guide
Package Contents
AT-HDVS-200-TX-PSK Installation Guide
Please check http://www.atlona.com/product/AT-HDVS-200-
TX-PSK for the most recent
firmware update
or
manual
.
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
