Atlona AT-HDVS-150-RX Скачать руководство пользователя страница 1

HDBaseT Scaler with HDMI and 

Analog Audio Outputs

Atlona HDVS recei ver was designed to smooth the transition from analog to digital displays in 
schools and businesses, allowing advanced HDMI display devices to be used with the many VGA 
computers still in use. Many displays don’t support the resolutions and refresh rates typical of VGA 
sources. In addition, the HDVS-150-RX is compatible with Atlona PoE switchers with HDBaseT 
outputs and is a good solution when scaling is required for a specific display.

When used with a matching HDVS-150-TX or HDVS-150-TX-WP, projector control is enabled. 
HDBaseT and Power over Ethernet 

(PoE)

 allow signal and power over a single category cable, with 

RS-232 control capability.

• 1 x AT-HDVS-150-RX
• 3 x Captive screw female connector (5 pin: audio, 3 pin: RS-232, 2 pin: power)
• 1 x 48V DC captive screw power adapter
• 1 x Installation Guide

Package Contents

AT-HDVS-150-RX Installation Guide

Please check http://www.atlona.com/product/AT-HDVS-150-

RX for the most recent 

firmware update

 or 

manual

.

atlona.com

Toll free: 1-877-536-3976

Local: 1-408-962-0515

Содержание AT-HDVS-150-RX







Отзывы: