AT-HDR-H2H-44M
9
Panel Description
3
5
4
6
7
8
9
AT-HDR-H2H-44M
1
2
3
4
RS-232 IR IN
HDMI IN
LAN
FW
DC 24V
S
RX TX
OUTPUT 1
OUTPUT 2
OUTPUT 3
OUTPUT 4
AT-HDR-H2H-44M
1
2
3
4
POWER
FNC
EDID
INFO
ENTER
CANCEL
1
2
1 Function Buttons
Power
- Sets the unit in and out of standby.
Enter
- Used for making selection within the front
panel OSD.
FNC
- Use to switch number buttons to their
secondary function.
CANCEL
- Navigates back one step in the front panel
OSD.
2 Number Buttons
Use for selection of inputs and outputs.
1
- Press FNC + 1 to route selected input to all
outputs.
2
- Press FNC + 2 to turn the IR receiver window on
and off.
3
- Press FNC + 3 to open the EDID menu.
4
- Press FNC + 4 to display the device firmware.
Press 4 again to view IP, IP port, and MAC.
3 HDMI IN
Connect HDMI cables to these ports from HDMI
sources.
4
S/PDIF OUT
Connect an optical audio cable from this TOSLINK
port to an audio input device.
5
HDMI OUT
Connect an HDMI cable from this port to an HDMI
display, extender, or switcher.
6 LAN
Connect an Ethernet cable from this port to a Local
Area Network (LAN). This port provides access to the
webGUI or TCP/IP control.
7 FW
Connect a mini USB cable to this port to update the
firmware.
8 Control Port
Connect a third party controller or PC to control the
matrix through either IR or RS-232.
9 DC 24V
Connect the included 24V DC power supply to this
power receptacle.
