– 5 –
AtlasSound.com
Specifications are subject to change without notice.
Owner’s Manual
AP-S15HR
AC Power Conditioner & Distribution Unit
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
Introduction
Thank you for purchasing the Atlas Power AP-S15HR AC Distribution and Suppressor Unit. The AP-S15HR has been designed to fit into
Atlas half width rack equipment racks. The AP-S15HR meets or exceeds most installation requirements for AC power distribution and
equipment power protection.
The AP-S15HR Half Rack design offers power management control, scalable power cord length, noise filtering, AC ground fault
indication and six AC outlets making it the most compact, cost effective power management protection system on the market today.
The AP-S15HR features noise filtering for unwanted Radio Frequency Interference (RFI) that is commonly introduced into AC lines by
nearby radio transmitters or wireless products. The benefit of the RF Filter can be seen on video products and heard audibly by reduced
static pops and external signal interference.
The AP-S15HR is unique by allowing you to select the power cord length that is required for the installation. A removable 12' IEC
power cord with a retainer bracket is supplied with the unit. If needed, a shorter or longer cord can be purchased separately to meet
installation requirements.
The AP-S15HR is designed to be mounted in a half width rack design but can also be rack mounted into 19" equipment racks by using
the optional PA702RMK kit. This kit allows you mount an AP-S15HR by itself or in conjunction with another Atlas half width rack product
such as the DPA-102PM, PA40G/PA60G, or MA40G/MA60G in a 19” 1RU space.
