Atlas AP-15T Скачать руководство пользователя страница 1

Specifications are subject to change without notice

www.AtlasSound.com

1601 JACK MCKAY BOULEVARD ENNIS, TEXAS U.S.A.   •    TELEPHONE: (800) 876-3332   •   FAX: (800) 765-3435

©2001 ATLAS SOUND LP

Printed in U.S.A.

00801

ATS000703 RevB 8/01

PN 8244600

INSTALLATION INSTRUCTIONS

AP-15T, AP-30T, APC-30T, APR-30T

MOUNTING

The speaker is provided with a 3-way omni-directional adjustable mounting bracket. The wing nut and the lock pin allow
360˚ rotation and 130˚ vertical movement. Additional adjustment is provided between the bracket and speaker by means
of the 

1

4

" bolt. For ease of installation, the base can be separated from the speaker by removing the 

1

4

" wing nut and

locking pin.

CONNECTION

Audio source line-connection is made to the screw terminals. To insure reliability, these
special terminals are designed with wire retainers. Phasing is indicated throughout the
communications system and attained by maintaining polarity utilizing the numbers “1”
& “2” cast into the speaker housing. (#2 is recommended for positive terminal).

IMPEDANCE SWITCH SETTING

The AP-15T, APC-30T, APR-30T and APT-34T (70Volt and 25 Volt line ) have a built-in,
7-position switch. The AP-30T (70 Volt line) and AP-30T-25 (25 Volt line) have a built in
6 position switch. Both weather-sealed switches select impedance or wattage taps. The
slot in the shaft without the flat indicates the switch setting in use. Desired wattage or
impedance can be obtained by referring to the following table.

AP-15T

AP-30T

AP-30T-25

APC-30T, APR-30T, APT-34T

Switch

70V

25V

70V

25V

70V

25V

Position

Watts

Watts

Ohms

Watts

Ohms

Watts

Ohms

Watts

Watts

Ohms

1

0.9

-

5000

1.2

4000

1.2

500

1.8

-

2500

2

1.8

-

2500

2.5

2000

2.5

250

3.7

-

1300

3

3.8

0.48

1300

5.0

1000

5.0

125

7.5

-

666

4

7.5

0.94

666

7.5

666

7.5

83

15.0

1.8

333

5

15.0

1.8

333

15.0

333

15.00

42

30.0

3.7

167

6

-

7.5

89

30.0

167

30.0

21

-

7.0

89

7

-

15.0

45

-

-

-

-

-

15.0

45

CABLE STRAIN RELIEF

A strain relief for SV or zip type cable is obtained by

utilizing the recess in the casting and the plastic cover. The wide slot is for SV and 
the narrow side for zip or 2-conductor cable.

ACCESSORIES

:

Conduit/cable adapters Model BX-1A for AP-30 Models.
BX-2A for AP-15 Models & BX-3A for APF Models

- Specially

designed
covers for conduit and armored cable connect directly into the
speaker. These accessories provide additional protection to
the speaker wires, and the cover assures tamper-proof instal-
lation and
vandalism-protection. 

Отзывы: