1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
AtlasSound.com
1/3
©2008
Atlas
Sound
LP
. All
rights
reserved.
Atlas
Sound
is
a
trademark
of
Atlas
Sound
LP
.
A
TS002872
RevB
9/08
Features
• Impressive effi ciency rating of 103 dB 1 W/1M makes the
AHSUB15S a perfect choice for low frequency augmentation of high
energy music playback at sporting events.
• Weather & rodent resistant.
• Rear fi ring woofer cavity and mesh screen over the
enclosure front to protect the speaker from weather
and/or rodent damage.
• Weather resistant connection via a convenient recessed terminal
block located on back of loudspeaker
• Secure surface mounting or suspension installation via the integral
forged eyebolts.
• 500 watts power handling
• Maximum output of 127 dB (Rated Power @ 1 M)
Applications
The Atlas Sound AHSUB15S subwoofer system features high output
and amazing low frequency response for indoor and outdoor applications
including football stadiums, sports arenas, baseball fields, and large audi-
toriums.
Unit features an efficient low frequency woofer loaded into a durable,
weather resistant, rear firing enclosure.
Installation
Ground Installation (Recommended)
Excellent results may be achieved by mounting the AHSUB15S under
bleacher seating. Electronic delay is suggested to approximate time
alignment of full range speakers with subwoofer(s) to the listener
locations.
Optional AHSUBSTAND allows easy installation of the AHSUB15S
under bleacher seating or other areas where concrete slab mounting is
possible. Stand provides secure mounting of the AHSUB15S in a down
firing configuration to maximize output performance while helping to
prevent theft and weather damage. Holes are provided on the bracket
feet for anchor points when mounting on concrete slab and additional
holes are located on the frame to allow the AHSUB15S to be attached to
the frame via chain or cable for optimal security.
Overhead Installation
Remember that wind will add considerable torque to the point of
attachment. The mounting surface the speaker is being attached to
should be able to handle five or more times the weight of the AH
speaker (7x recommended for locations subject to high wind forces).
The installer must ensure that the surface is capable of safely and
securely supporting the load. The hardware employed must be safely
and securely attached both to the loudspeaker and the surface in
question. A general rule for soft surface installations (wood beams) is to
multiply the corresponding working load limit by 75%: the result will be
an approximate working load strength.
AHSUB15S
AHSUB15S
15" AH Series Stadium Subwoofer System
AHSUB15S
Mounted
on Optional
AHSUBSTAND