ATLAS North America Proprietary
Sea Scan ARC Scout MKII Installation Guide
1 of 1
Page: 13
Issue: 1.1.0
SCTM2-INST
Installation Manual
7.2 Single Frequency Configuration
Below is the wiring configuration of the ARC Scout MkII Single Frequency Configuration.
7.3 Input Power Cable
Part Number: ANA0000475
The Input Power Cables connect the Sea Scan ARC Scout MkII with the input power source. This cable
comes pre-terminated on one end with a Molex KK2695 Series 2-pin connector that mates with the Sea Scan
ARC Scout MkII, the other end is to be terminated to fit your specific application. Two Input Power Cables
are required with the Dual Frequency configuration.