manualshive.com logo in svg

Atlas Copco ZR-55, Инструкция

Поделиться
Скачать
Atlas Copco ZR-55 Скачать руководство пользователя страница 6

1

Safety precautions

1.1

Safety icons

Explanation

Danger for life

Warning

Important note

1.2

Safety precautions during installation

All responsibility for any damage or injury resulting from neglecting these
precautions, or non-observance of the normal caution and care required for
installation, operation, maintenance and repair, even if not expressly stated, will
be disclaimed by the manufacturer.

General precautions

1. The operator must employ safe working practices and observe all related work safety requirements and

regulations.

2. If any of the following statements does not comply with the applicable legislation, the stricter of the two

shall apply.

3. Installation, operation, maintenance and repair work must only be performed by authorised, trained,

specialised personnel.

4. The compressor is not considered capable of producing air of breathing quality. For air of breathing quality,

the compressed air must be adequately purified according to the applicable legislation and standards.

5. Before any maintenance, repair work, adjustment or any other non-routine checks, stop the compressor,

press the emergency stop button, switch off the voltage and depressurise the compressor. In addition, the
power isolating switch must be opened and locked.

6. Never play with compressed air. Do not apply the air to your skin or direct an air stream at people. Never

use the air to clean dirt from your clothes. When using the air to clean equipment, do so with extreme
caution and wear eye protection.

7. The owner is responsible for maintaining the unit in safe operating condition. Parts and accessories shall

be replaced if unsuitable for safe operation.

Precautions during installation

1. The machine must only be lifted using suitable equipment in accordance with the applicable safety

regulations. Loose or pivoting parts must be securely fastened before lifting. It is strictly forbidden to

Instruction book

5

Содержание ZR-55











































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды