manualshive.com logo in svg

Atlas Copco ZR 110, Инструкция

Поделиться
Скачать
Atlas Copco ZR 110 Скачать руководство пользователя страница 54

Step

Action

2

Connect the cable (delivered with the profibus module) from connector (DP) of the
profibus module to connector (7X16) of the (COM2) module.

3

Connect the profibus network to connector (PORT0) of the profibus module.

4

Connect the 24V power supply from terminals (6 and 7) of terminal strip (1X1) to
terminals (N and L1) on the profibus module.

5

Connect an earth cable between the profibus module and the module of the compressor
regulator.

6

Consult Atlas Copco to check the installation and to have the communication software
loaded.

3.9

Control programs

In order to facilitate programming and controlling, menu-driven control programs have been implemented
in the regulator.

Program

Function

Main screen

Shows in short the operation status of the compressor. Is the gateway to all
functions.

Status data

Calling up the status of the compressor protection functions (shut-down, shut-
down warning and motor overload). Resetting of a shut-down and motor overload.

Measured data

Calling up the actually measured data and the status of the motor overload
protection.

Hours

Calling up the running hours, loading hours, regulator hours and number of motor
starts.

Service

Calling up and resetting the service messages of the monitored components.

Test

Display test.

Modify settings

Modifying the settings for regulation (e.g. loading and unloading pressures), for
protection (e.g. temperature shut-down level) and for service (e.g. for the oil).

Timers

Programming time-based compressor start/stop commands.

Configuration

Programming the time, date, display language, units and date format.

Saved data

Calling up the saved data: last shut-down, longest load and unload data and last
emergency stop data.

Show more

Quick look at the actual status of the compressor.

Unload/Load

To manually load and unload the compressor.

Instruction book

52

2920 1815 04

Содержание ZR 110









































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды