Transport
WARNING Transport
During transportation the machine can overturn and
cause serious injury.
►
Always strap the machine.
►
Keep your feet away from the machine.
NOTICE
When the machine is laid down, there is
a risk for the oil in the crankcase running into the
combustion chamber and/or the air filter. This leads
to starting difficulties.
♦
Make sure that the machine is laid down
horizontally with the front side down. It must not
differ more than 40 mm (1.6 in.) from the rammer
shoe to the top of the machine.
♦
Lay the machine down when it is switched off and
not being used.
♦
Secure the machine via the lifting hook (A) and
the lower lifting handle (B).
B
A
♦
When moving short distances the machine can
be tilted forward, so that it rests on the plastic
wheels on the handle. Lift with the lower lifting
handle (C) and roll the machine forwards or
backwards.
C
Lifting
WARNING Lifting hazard
During lifting the machine can fall down this can
cause serious injury.
►
Never walk or stand under a lifted machine.
►
Keep your feet away from the machine.
♦
Always use the machine's lifting eye (A) to lift the
machine.
A
B
♦
The lifting equipment must be in dimensioned in
order to fulfil all regulations. Before lifting check
that lifting eye (A) and rammer shoe (B) are
correctly attached and not damaged.
Installation
Fuel
Filling
WARNING Fuel hazard
The fuel is extremely flammable and fuel fumes can
explode when ignited, causing serious injury or death.
►
Protect your skin from contact with the fuel.
►
Never remove the filler cap or fill the fuel tank
when the machine is hot.
►
Never smoke when filling the fuel tank or when
working with the machine or servicing it.
►
Avoid spilling fuel and wipe off any fuel spilled at
the machine.
13
© 2011 Atlas Copco Construction Tools AB | No. 9800 1139 01 | 2011-04-01
Original instructions
Safety and operating instructions
LT 800
