Overview
To reduce the risk of serious injury or death to
yourself or others, read the Safety instructions
section found on the previous pages of this
manual before operating the machine.
Design and function
LT rammers are designed for the compaction of fill,
including fill that contains clay.
Applications include house foundations, and bearing
courses for roads and parking areas etc.
They can be used to advantage in pipe trenches and
for compacting round posts etc.
LT rammers must only be used in well-ventilated
areas, as is the case for all combustion engine
machines.
Do not lift the machine in any way during operation,
and do not operate on steeper slopes than those
recommended in this manual.
No other use is permitted. To choose the correct
accessories, see the spare parts list.
Main parts
A
B
C
D
E
F
G
A.
Fuel tank
B.
Engine throttle wire
C.
Fuel filter
D.
Air filter
E.
Oil dipstick
F.
Oil drain plug
G.
Spring-loaded leg oil, sight glass
H
I
I
K
J
H.
Silencer
I.
Drainage plugs
J.
Oil strainer
K.
Recoil starter
Labels
The machine is fitted with labels containing important
information about personal safety and machine
maintenance. The labels must be in such condition
that they are easy to read. New labels can be ordered
from the spare parts list.
Atlas Copco Construction Tools AB
105 23 Stockholm, Sweden
Type
Operating mass kg
Rated power kW
Year of Mfg
P
roduct
I
dentification
N
umber
Made in Sweden
Made in Sweden
11
© 2011 Atlas Copco Construction Tools AB | No. 9800 1139 01 | 2011-04-01
Original instructions
Safety and operating instructions
LT 800
