Atlas Copco G2422-1, Инструкция по эксплуатации продукта

Страница: 15 / 20

G2422-1 EN Service
© Atlas Copco Industrial Technique AB - 9839 0485 01
15
Lubrication
For flexible spindle extension
– When fitting the extended spindle – apply 0.5
cm
3
(0.03 cu in) of grease type “Lubricating Engineers LE3752” (or EP grease)
at the bottom of the hole in the collet holder.
Lubricating guide
Use lubricants of good quality. The oils and greases listed in the lubrication ta-
ble are examples of lubricants that can be recommended.
Brand
General purpose
Bearings
BP Energrease LS-EP2
Castrol Spheerol EP L2
Esso Beacon EP2
Q8 Rembrandt EP2
Mobil Mobilegrease XHP 222
Shell Alvania EP2
Texaco Multifak EP2
Molycote BR2 Plus
Dismantling/Assembling instructions
Instructions for vane motor
WARNING Polymer hazard
The vanes in this product contain PTFE (a synthetic fluoropolymer). Due to
wear, there might be PTFE particles inside the product. Heated PTFE can
produce fumes which may cause polymer fume fever with flu-like symp-
toms, especially when smoking contaminated tobacco.
Health and Safety recommendations for PTFE must be followed when han-
dling vanes and other components:
►
Do not smoke when servicing this product
►
PTFE-particles must not come in contact with open fire, glow or heat
►
Motor components must be washed with cleaning fluid and not blown
clear with an air line
►
Wash your hands before starting any other activity