Atlas Copco G2422-1, Инструкция по эксплуатации продукта

Страница: 11 / 20

G2422-1 EN Operation
© Atlas Copco Industrial Technique AB - 9839 0485 01
11
Setting-up instructions
WARNING Risk of Serious Injury or Death
Overspeed can cause serious injury or death!
►
Do not manipulate the speed of the tool.
►
Do not override the maximum speed marked on the tool.
Testing of the die grinder should only be done by professional technicians. The
technicians must be authorized to test this type of tool and to operate a pneu-
matic system in accordance with national directives.
• Do a free speed check of the tool every day and whenever the tool has been
serviced. Do the free speed check with the grinding equipment removed.
• Use a pressure regulator to prevent a too high air pressure which can cause
overspeed.
• Make sure that connections and the air hose are in good condition.
Legend to page 2
A Do a free speed check
Maximum
20000 r/m
B Maximum air pressure
-7 bar -102 psig
Operating instructions
Visual inspection
Tool and accessories
Inspect the tool and its parts visually before use.
• Collet holder.
• Throttle lever.
• Lever catch.
Look for any damages or oil leakage that can compromise the safety of the tool.
Air installation
Inspect the air installation from the supply point to the tool visually before
use.
• Hose
• Couplings
• System pressure
• Air filter
Look for any damage that can compromise the safety of the tool.