Atlas Copco CC 250, Руководство по эксплуатации

Страница: 36 / 40

36
Index
A
H
Accident prevention regulations, 6
H
Applications, 9
H
Attaching the adapter to the Combi cutter, 14
C
H
CE−nameplate, 8
H
Checking and cleaning the hydraulic oil filter, 31
H
Checking for cracks, 29
H
Checking for wear, 31
H
Checking screw couplings, 31
H
Checking the adapter bolts for wear, 31
H
Checking the blade clearance, 30
H
Checking the hydraulic lines before starting
work, 31
H
Checking the O−rings, 30
H
Combi cutter does not cut, 33
H
Combi cutter does not work, 33
H
Combi cutter shows insufficient closing force, 33
H
Components of the Combi cutter CC 250, 10
H
Components of the Combi cutter CC 550, 11
D
H
Dismounting the Combi cutter from the excava
tor for short or lengthy periods of non−use, 17
H
Disposal, 34
E
H
Explanation of the symbols used in this opera
ting instructions, 6
F
H
Foreword, 5
H
Functional test, 18
G
H
General informations, 9 , 27
H
Grease, 12
I
H
Inadequate lubrication, 34
H
Installation, 12
H
Instructions on the correct use of the Combi cut
ter, 19
L
H
Lightweight, powerful, robust − Light−duty CCs.,
34
H
Lubrication of the Combi cutter, 28
M
H
Main components, 10
H
Maintenance / Tightening torques, 32
H
Maintenance and care of the Combi cutter, 27
H
Maintenance to be carried out by the carrier dri
ver, 28
H
Marking according with machinery directive
98/37/EC, 8
H
Media/consumables, 12
H
Mineral hydraulic oil, 12
H
Mounting the Combi cutter on the excavator −
hydraulic aspects, 16
H
Mounting the Combi cutter on the excavator −
mechanical aspects, 15
N
H
nameplate, 8
H
Non−mineral hydraulic oil, 12
O
H
Oil leaks from hydraulic ports, 34
H
Operating pressure too high, 33
H
Operating the Combi cutter, 18
H
Operating the Combi cutter with the cylinders
fully extended or retracted, 27