Atlanta 1337DL, Техническое руководство и перечень запасных частей, Страница: 16 / 62

Technical Manual & Parts Lists
11
Major Machine Components
All directions (front, back, right or, left) are assumed to be from the front facing the unit unless
otherwise stated
.
ON / OFF Switch
o
Basic on / off pushbutton operation for machine power.
o
The ON button will not energize the machine unless the
red EMERCENCY STOP BOTTON (Operator Panel) is
in the up position.
o
The red Off kill all power to the machine
Operator Panel
o
EMERGENCY STOP (E-Stop) - LARGE RED BUTTON

Press Down to disengage all power to the machine (electrical and Pneumatic).

Turn CW and pull up to reset the E-STOP button.

The
ON / OFF Switch
will not operate if the E-STOP button is pressed.
o
CUT – LARGE YELLOW BUTTON

In Manual Mode the Cut Cycle is activated every time.

In Auto Mode it performs two functions
 First Press - Activates the Cut Cycle
o
Closes Finger Guard
o
Turns on Cutter Motor
o
Moves the Cutter Motor to across the material based on a specified
amount of time timer controlled by the digit switches(Position 1-2)
on the Main Controller front panel, Then back to the home position
for that same amount of time.