Atlanta Attachment Company 1393E Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 60

Atlanta Attachment Company 1393E Скачать руководство пользователя страница 19

Technical Manual & Parts Lists

d.- Table Lift Operation.

This allows the operator to select the position of the out-feed
table.    If  “Table  Lift  Up”  is  selected,  the  table  will  lift  and
lock  in  place  for  cutting  panels.    If  “Table  Lift  Down”  is
selected, the table will lower to allow the windup roller to be
used  to  wind  up  material.    This  option  is  available  on  3
different menu screens. (Panel Mode, Border Mode, & Maint.
Menus)

e.- Panel Width Sensors

These sensors are what determine the width of the panel
being cut. The top sensor is for Twins, the 2

nd

for Fulls, The

3

rd

for Queens, The 4

th

for Cal Kings, and the bottom for

Kings.    These  sensors  are  only  active  when  in  the  Panel
mode with the table in the UP position.  The scale next to the
sensors  is  the  actual  width  of  the  panel  being  cut.    When
switching to a different thickness of panel the widths can be
adjusted by moving the lever at the right of the table.

From

the

library

of:

Diamond

Needle

Corp

«
...
17
18
19
20
21
...
»

Содержание 1393E





























































Отзывы:

Нет отзывов