Atlanta Attachment Company 1390BX, Техническое руководство и перечень запасных частей

Страница: 24 / 172

Technical Manual & Parts Lists
16
Bottom Film Loading
The standard 1390 machine comes with a pull out Bottom Film Roll storage rack that can handle
up to (3) 12” diameter x 120” long rolls of plastic film.
The Bottom Film Rack can be assembled two ways so it can be pulled out to the left or to the
right of the machine for loading.
To load the rack:
1. Pull out the (2) locating/locking pins to (one on each side of the machine) unlock the rack from the
rest of the machine.
2. Pull the rack out from under the machine far enough to load the rolls of film. Load three rolls using a
standard fork lift or other means.
Important note!
The film rolls must be loaded such that they unwind clockwise, looking from the left side of the
machine (see “Film Routing” on page 19).
3. Roll the rack back under the machine and insert the locating/locking pins.
The Bottom Film Roll Rack assembly has two roll release rods which allow the operator to
advance one roll of film at a time into the Bottom Film Roll Cradle. The release rods are extended to the
right end of the rack, so the rolls can be advanced with the rack assembly locked in place.
Figure 8