Atlanta Attachment Company 1335MF Скачать руководство пользователя страница 16

Страница: 16 / 86

Technical Manual & Parts Lists

Fig. 1

General Machine Data

Electrical & Pneumatic Specifications

Electrical:

220 VAC, 5amp, 50/60 Hz Single Phase

Pneumatic:

70-80 PSI, 2 SCFM avg.

Sewing Head:

Yamato VM1804P

Sewing Speed:

3500 RPM

Needle (Standard):

SN62X5721

Stitch Density:

6 SPI

Installation & Setup



Provide a 220VAC, single phase, 5 Amp electrical drop and 1/4" air supply line (80 PSI).



Remove any shipping straps from machine.



Mount and adjust the Guide Roller Assembly.



Check the oil level in the oil pan.

Control Box Operation

Main Control Box:

The front of the main control box has an Auto/Manual Switch, a Manual Ruffle

Pushbutton, an Unwinder Reverse Switch, a Fuse Holder, and 6 Thumbwheels. On the

back is the power entry socket and an on/off switch. Be sure the on/off switch is always
on.

Note: The on/off switch only switches one line and does not make the box

safe to work on. Always disconnect the main power cord before servicing the

control box.

The Auto/Manual Switch turns on the automatic ruffling cycles for the corners.

When this switch is in Manual, the ruffling is disabled and the machine will only sew, trim,
and foot lift.

The Manual Ruffle pushbutton turns on

one ruffle cycle and also functions as the

Reset button for the automatic cycle. Pushing

this button once will turn on the ruffle cycle.
Pushing it a second time will reset the

automatic program and cause the ruffle
hardware to reset and go to its "Home"

position. Use this button to reset the ruffler
after adjusting the ruffle size.

The Unwinder will run whenever the

Treadle is not in the neutral position (either
sewing or healed back) and the Loop Eye is

seeing the gusset material.

The Fuse Holder fuses the entire

machine. Replace the fuse with a 5A Slow

Blow 250v as necessary.

Содержание 1335MF























































































Результаты поиска

Содержание 1335MF

Отзывы:

Бренды по названию

Популярные бренды

Atlanta Attachment Company 1335MF, Техническое руководство и перечень запасных частей

Результаты поиска

Содержание 1335MF

Отзывы:

Бренды по названию

Популярные бренды