ATIM Cloud Wireless ACW/LW8-MR4 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 36

ATIM Cloud Wireless ACW/LW8-MR4 Скачать руководство пользователя страница 5

5

ATIM_ACW-MR4_UG_EN_V1.5

1.5

02/06/2022

Change measurement frame

Add downlink command to change counter

index

YLB

V1.0.4

Disclaimer

The information contained in this document is subject to change without warning and does not represent a

commitment on the part of ATIM radiocommunications. ATIM radiocommunications provides this document ‘as

-

is’

with no warranty of any kind, express or implied, including but not limited to implied warranties of merchantability or
fitness for a particular purpose. ATIM radiocommunications may make changes and/or improvements to this manual
or to the product(s) or program(s) described in this manual, at any time.

Trademarks and copyright

ATIM radiocommunications®, ACW ATIM Cloud Wireless® and ARM Advanced Radio Modem® are registered
trademarks of ATIM SARL in France. The other trademarks mentioned in this document are the property of their
respective owners.

«
...
3
4
5
6
7
...
»

Содержание Cloud Wireless ACW/LW8-MR4





































Отзывы:

Нет отзывов