11
ATIM_ACW-D_UG_EN_V1.5
a.
Bridge mode configuration (SF8)
Attention
Setup available for SF8 (Sigfox) references Software 2.3 Revision B.0 or prior.
The following information applies to the ACW / SF8-DINRS.
In this mode of operation, the data of the serial link is directly transmitted as such on the Sigfox network.
Note:
If the frames sent via the serial link are greater than 12 bytes these will be split into several frames of
12 bytes.
Note:
The transmission time of a frame depends on its length (10 seconds max).
