12
ATIM_ACW-TM2D-HP_UG_EN_V1.2
Operation
The ACW-TM2D-HP
measures temperature at time ‘t’ and sends the data by radio on the associated Sigfox or
LoRaWAN network, depending on which model you use.
Two modes of operation are available: Periodic or Energy Saver.
a.
Periodic mode (shown as ‘Periodical’ i
n the configuration tool)
To ensure the most complete telemetry possible, temperature readings are sent on a regular and periodic basis. This
makes it possible to obtain a very precise monitoring curve. In this mode, each reading is sent out by the ACW-TM2D-
HP. In other words, the sampling period is equal to the statement period (= interval at which readings are sent out).
This sampling and statement period is user-configurable, with a minimum value of 10 minutes.
Example of operation in Periodic mode:
On the other hand, because this mode involves regular (and potentially very frequent) radio transmissions, this mode
of operation may consume large amounts of energy, leading to reduced battery life.
