manualshive.com logo in svg

Aticio 816, Руководство по эксплуатации, Страница: 9 / 580

Поделиться
Скачать
Aticio 816 Скачать руководство пользователя страница 9

vii

Using the Scanner in a Network Environment

You can use a scanner over the network.

• You can send scan files to a specified destination using e-mail (Sending scan

file by e-mail). See “Sending Scan Files by E-mail”, Scanner Reference.

• With the ScanRouter delivery software, you can save scan files in specified

destinations on network computers (Saving scan files). See “Sending Scan
Files by Scan to Folder”, Scanner Reference.

• You can send scan files directly to folders (Sending scan file by Scan to Folder).
• Under the network delivery scanner function, you can use the machine as a

delivery scanner for the ScanRouter delivery software or DeskTopBinder.
You can save scan files or fax-received files in the delivery server, or deliver
them to a folder on a computer on the same network.

• For details about specifying the machine’s settings for using its scanner func-

tion over the network, see “Network Settings”, General Settings Guide. 

• For details about using the scanner function over the network, see “Using the

Network TWAIN Scanner Function”, Scanner Reference. (For machines with
the DDST Unit, see “Using the Network TWAIN Scanner Function”, Print-
er/Scanner Reference.)

ARC005S

Содержание 816





































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов