manualshive.com logo in svg

Aticio 816, Руководство по эксплуатации, Страница: 19 / 580

Поделиться
Скачать
Aticio 816 Скачать руководство пользователя страница 19

5

Safety Information

When using this machine, the following safety precautions should always be followed.

Safety During Operation

In this manual, the following important symbols are used: 

R

 

WARNING:

 

Indicates a potentially hazardous situation which, if instructions are not followed, could result 
in death or serious injury.

Indicates a potentially hazardous situation which, if instructions are not followed, may result 
in minor or moderate injury or damage to property.

 

•

Disconnect the power plug (by pulling the plug, not the cable) if the 
power cable or plug becomes frayed or otherwise damaged.

•

To avoid hazardous electric shock or laser radiation exposure, do not 
remove any covers or screws other than those specified in this manual.

•

Turn off the power and disconnect the power plug (by pulling the plug, 
not the cable) if any of the following occurs:

•

You spill something into the machine.

•

You suspect that your machine needs service or repair.

•

The external housing of your machine has been damaged.

•

Do not incinerate used toner or toner containers. Toner dust might ig-
nite when exposed to an open flame.

•

Disposal can take place at our authorized dealer.

•

Dispose of used toner containers in accordance with local regulations.

•

Keep the machine away from flammable liquids, gases, and aerosols. 
A fire or an electric shock might occur.

•

Connect the machine only to the power source described on the in-
side front cover of this manual. Connect the power cord directly into 
a wall outlet and do not use an extension cord.

•

Do not damage, break or make any modifications to the power cord. 
Do not place heavy objects on it. Do not pull it hard nor bend it more 
than necessary. These actions could cause an electric shock or fire.

•

If the power cord is damaged (exposure of the core, disconnection, 
etc.), contact your service representative to change a new one. Oper-
ating the machine with a damaged power cord may cause an electric 
shock or fire.

Содержание 816





































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов