GENERAL INFORMATION AND FEATURES
210-0197_Libretto_TX_ATI_2020-02_ATI-eng
4
ed. 2020-02
Use, for the movement, a forklift or a hand pallet truck. As indicated in the figure, insert the forks in the lower
part of the appliance.
Remove the packing 4 by unscrewing the screws at the bottom corners of the appliance, then pull upwards
the packaging for whole, taking care not to damage the appliance. The European Directive 2002/96 / EC
imposes the selective disposal and recycling of electrical and electronic equipment.
3 CONTENT, WEIGHT AND DIMENSIONS OF PACKAGE
The appliance is delivered packaged in a wooden crate (1) with appropriate protections.
The break windproof pulling device is provided in a separate housing (2) (to be mounted subsequently during
installation)
Make sure that both parts (1 and 2) are present and that they are not damaged during transport
1
2
TX160
cm 58 x 58 x 185
131 kg
cm 46 x 46 x 23
5 kg
TX220
cm 78 x 78 x 141
184 kg
cm 68 x 68 x 25
6 kg
TX300
cm 78 x 78 x 176
220 kg
cm 68 x 68 x 25
6 kg
TX400
cm 78 x 78 x 211
260 kg
cm 68 x 68 x 25
6 kg
TX600
cm 98 x 98 x 180
262 kg
cm 68 x 68 x 25
6 kg
TX800
cm 98 x 98 x 210
320 kg
cm 68 x 68 x 25
6 kg
4 DEVICE CATEGORY
These appliances are classified as "generators of hot water at atmospheric gases, water storage."
With reference to the European standard EN 483, the apparatus is of type B11BS, i.e. is a
"device ready for connection to a flue pipe which provides the evacuation of the
combustion products out from the environment; the combustion air is drawn directly from
the environment in which the appliance is installed. "
5 TECHNICAL DATA
TX160
TX220
TX300
TX400
TX600
TX800
class healthcare efficiency
C
C
C
C
C
C
load profile
XL
XXL
XXL
XXL
XXL
XXL
nominal capacity
L
155
220
300
400
580
740
