ATI Technologies Radeon X300 Series, Руководство пользователя

Страница: 41 / 54

Using TV Out 35
To enable or disable the TV display
1 Access the Windows® Control Panel . Double-click Display .
2 Click the Settings tab and then the Advanced button.
3 Click the ATI Displays tab. Click the TV button.
4 Click the enable button or disable button accordingly.
5 Click OK or Apply to save the changes.
Using and Adjusting TV Display Features
For information about how to adjust TV display features, right-click the
ATI taskbar icon , point to Help , then point to ATI Television Display .
TV Display Hardware Restrictions
A TV cannot be left connected to the graphics card if two analog monitors
are connected to your RADEON™ X300 card, even if the TV is off and not
enabled in the software.
Similarly, an analog monitor connected to the DVI-I connector should not
be left connected to your RADEON™ X300 card when TV Out is enabled.
In both cases, your RADEON™ X300 will become overloaded, resulting
in a dim image on all devices.
Using a Monitor vs. Using TV Display
Using your TV for your computer’s display can be useful, however, the
display on your monitor may change or looked squashed. This distortion
occurs because the display adjusts to fit the dimensions of your TV. To
correct the monitor’s display, use the monitor’s control buttons to adjust its
display size and position.
Some single-frequency monitors may not work with TV display enabled. If
you experience problems when TV display is enabled, disable TV display
to restore your monitor’s display.
Adjusting Monitor Display
The size of the display on your monitor may become smaller and not
perfectly centered when you have TV display enabled. These effects are
caused by the changes required to provide a proper display on the TV.
Use the controls available on the Adjustments tab on the Monitor
Properties page (accessible by clicking on the Monitor button on the ATI
Displays tab) to adjust the display on your monitor only. Click the TV
button to adjust the TV display only.