ATI Technologies RADEON 7500, Руководство пользователя

Страница: 41 / 44

41
Using and Adjusting TV Out
Enabling and Disabling the Television Display
1
Click Start .
2
Point to Settings , then click Control Panel .
3
Double-click Display .
4
Click on the Settings tab and then the Advanced... button.
5
Click on the ATI Displays tab.
6
Click on the green enable/disable button next to the word
“TV” to enable/disable television display.
If there is no display on your TV, you may need to switch it
to video display mode. For more information, consult the
documentation supplied with your TV. If your television is
connected to your VCR, you may need to tune the TV to the
VCR’s output. For information about connecting your TV to
your VCR, consult the documentation that came with your
VCR.
7
Click Apply to save the changes you have made.
For information about how to use television display and the ATI
Displays Properties page, click the
Help button.
Starting Windows
®
with Television Display Enabled
The television screen may become scrambled during the initial
Windows
®
logo display. This is only a temporary effect and
your television screen will be restored within a few seconds.
Note
A TV cannot be left connected to the graphics card if
two analog monitors are connected to the RADEON
8500/RADEON 7500, even if the TV is off and not
enabled in the software.
An analog monitor connected to the DVI-I connector
cannot be left connected to the RADEON
8500/RADEON 7500 when TV out is enabled.
In both cases, the RADEON 8500/RADEON 7500
will become overloaded, resulting in a dim image on
all devices.