manualshive.com logo in svg

ATI Technologies QC-11, Руководство пользователя, Страница: 69 / 72

Поделиться
Скачать
ATI Technologies QC-11 Скачать руководство пользователя страница 69

Manual, Robotic Tool Changer, QC-5 through QC-27

Document #9610-20-2254-09

Pinnacle Park • 1041 Goodworth Drive • Apex, NC 27539  USA • Tel: 919.772.0115 • Fax: 919.772.8259 • 

www.ati-ia.com

 

69

9.6  QC-27 Tool Changer

3rd ANGLE PROJECTION

 19.4 

 40.4 

 24.1 

 8.1 SHCS 

 25.4 

 14 

8X 1/8" NPT

Note 1

1

 23.8 

 11 

8X 1/8" NPT

2

 BC

76.2 

 4X 50° 

 25° 

2X

5 H7 6.4

Customer Interface

6X Thru Hole for

M4 SHCS

Customer Interface

 

45 H7 

 

89.9 

 25° 

 30° 

 20° 

 15° 

 15° 

 55° 

 20° 

 30° 

 20° 

 BC

76.2 

 4X 50° 

 

89.9 

 25° 

2X

4 Slip Fit 6.4

 6X M4 SCHS 

 

22.2 

 25° 

78.4

(Coupled)

64.4

(Coupled)

Side View (Coupled)

Iso View

M5 

10.2

Lock Port

M5 

7.6

Unlock Port

Notes:

Mounting Hardware Included on Master Side.

1.

Fittings not supplied by ATI.

2.

Tool Side

(Projection Only)

Side View

Master Side

(Projection Only)

Revision Table

Rev.

Description

Initiator

Date

03

Eco 14758; 9120-027M-000-000-S0 was 9120-027HM-000-000-E- 6160; 9120-027T-000-000 was 9120-027T-000-000-E

LJH

8/19/2016

ITEM NO.

QTY.

PART NUMBER

DESCRIPTION

1

1

9120-027M-000-000-S0

QC-27 Master, (8) 1/8" NPT Ports, No  Sensors

2

1

9120-027T-000-000

QC-27 Tool, (8) 1/8" NPT Pass  Through Ports

B

1:2

1

3

REVISION

NOTES:  UNLESS OTHERWISE  SPECIFIED.

DO NOT SCALE DRAWING.   ALL DIMENSIONS ARE IN  MILLIMETERS.

DRAWN BY:

CHECKED BY:

D. Bohle       07/28/14

K. Zachary   07/31/14

TITLE

SCALE

SIZE

DRAWING NUMBER

PROJECT #

SHEET       OF 

9630-20-027

140722-1

02

PROPERTY OF ATI INDUSTRIAL AUTOMATION, INC. NOT TO BE REPRODUCE

D IN ANY 

MANNER EXCEPT ON ORDER OR WITH PRIOR WRITTEN AUTHORIZATION OF A

TI.

1031 Goodworth Drive, Apex, NC 27539, USA Tel: +1.919.772.0115      Email: [email protected] Fax: +1.919.772.8259      www.ati-ia.com ISO 9001 Registered Company

 

QC-27 Customer Drawing, (8) 1/8" NPT Ports

Содержание QC-11









































































Отзывы:

Нет отзывов