9
O&M Manual
Rev-H (6/19)
Part 2 – Analyzer Mounting
2.1
General
All Q46 Series instruments offer maximum mounting flexibility. A bracket is included with each unit that
allows mounting to walls or pipes. In all cases, choose a location that is readily accessible for calibrations.
Also consider that it may be necessary to utilize a location where solutions can be used during the calibration
process. To take full advantage of the high contrast display, mount the instrument in a location where the
display can be viewed from various angles and long distances.
Locate the instrument in close proximity to the point of sensor installation - this will allow easy access during
calibration. The standard cable length of the conductivity sensor is 20 feet. For sensor cables longer than
20 feet, use the optional junction box (07-0100) and sensor interconnect cable (31-0057).
Figure 1 - Enclosure Dimensions, AC Powered Units
