manualshive.com logo in svg

ATI Technologies Metrinet, Руководство по эксплуатации и обслуживанию, Страница: 33 / 34

Поделиться
Скачать
ATI Technologies Metrinet Скачать руководство пользователя страница 33

 
 

 

 

 

PRODUCT WARRANTY

 

 
 
Analytical Technology, Inc. (Manufacturer) warrants to the Customer  that if any part(s) 
of  the  Manufacturer's  equipment  proves  to  be  defective  in  materials  or  workmanship 
within the earlier of 18 months of the date of shipment or 12 months of the date of start-
up, such defective parts will be repaired or replaced free of charge.  Inspection and repairs 
to products thought to be defective within the warranty period will be completed at the 
Manufacturer's  facilities  in  Collegeville,  PA.    Products  on  which  warranty  repairs  are 
required  shall  be  shipped  freight  prepaid  to  the  Manufacturer.    The  product(s)  will  be 
returned freight prepaid and allowed if it is determined by the manufacturer that the part(s) 
failed due to defective materials or workmanship. 
 
 

This warranty does not cover consumable items, batteries, or wear items subject 

to periodic replacement including lamps and fuses. 
 
 

Gas sensors carry a 12 months from date of shipment warranty and are subject to 

inspection  for  evidence  of  misuse,  abuse,  alteration,  improper  storage,  or  extended 
exposure to excessive gas concentrations.  Should inspection indicate that sensors have 
failed due to any of the above, the warranty shall not apply. 
 
 

The Manufacturer assumes no liability for consequential damages of any kind, and 

the buyer by acceptance of this equipment will assume all liability for the consequences 
of  its  use  or  misuse  by  the  Customer,  his  employees,  or  others.    A  defect  within  the 
meaning of this warranty is any part of any piece of a Manufacturer's product which shall, 
when such part is capable of being renewed, repaired, or replaced, operate to condemn 
such piece of equipment. 
 
 

This  warranty  is  in  lieu  of  all  other  warranties  (including  without  limiting  the 

generality  of  the  foregoing  warranties  of  merchantability  and  fitness  for  a  particular 
purpose), guarantees, obligations or liabilities expressed or implied by the Manufacturer 
or its representatives and by statute or rule of law. 
 
 

This warranty is void if the Manufacturer's product(s) has been subject to misuse 

or abuse, or has not been operated or stored in accordance with instructions, or if the 
serial number has been removed. 
 
 

Analytical Technology, Inc. makes no other warranty expressed or implied except 

as stated above. 
 

 

Содержание Metrinet



































Отзывы:

Нет отзывов