ATI Technologies All-in-Wonder X800 PCI Express, Руководство пользователя по установке и настройке

Страница: 13 / 60

Quick Installation 5
CHAPTER 2:
Installing Hardware
This chapter will guide you through the physical installation of your All-in-
Wonder® X800 PCI Express® card.
Quick Installation
For experienced users and system administrators, follow these brief
instructions for installing your All-in-Wonder® X800 PCI Express® card
in the shortest possible time.
Installation Steps
1
Uninstall the drivers and software for your old graphics card.
2
Shut down and disconnect your computer system.
3
Remove any previously installed card.
4
Install your new All-in-Wonder® X800 PCI Express® card.
5
Reassemble and connect your computer system.
6
Install the All-in-Wonder® X800 PCI Express® drivers and
configuration software from the ATI Installation CD-ROM by doing
one of the following:
• Run through the automatic ATISETUP utility; or
• Start > Run > X:\ATISETUP.EXE (where X is the drive letter
of your CD-ROM drive).
Detailed Installation
The following instructions will take you step by step through the
installation of your new All-in-Wonder® X800 PCI Express®.
L
If you are using a motherboard containing an on-board graphics
solution and do not intend to use it as part of a multiple monitor display,
disable it.