Manual, Compliant Deburring Blade
Document #9610-50-1030-04
Pinnacle Park • 1031 Goodworth Drive • Apex, NC 27539 • Tel: +1.919.772.0115 • Fax: +1.919.772.8259 •
7
1.3 Safety Precautions
WARNING:
Never operate the CDB tool without wearing eye protection. Flying debris
can cause injury. Always use eye protection while working in the neighborhood of the
CDB tool.
CAUTION:
Do not use spare parts other than original ATI spare parts except for
consumables. Use of spare parts not supplied by ATI can damage equipment and void
the warranty. Always use original ATI serviceable parts.
CAUTION:
Never be present near the CDB tool while it is in operation. Flying debris
can cause injury. If it is necessary to approach the CDB tool while in motion, stand
behind appropriate clear guards or similar windows. Provide a barrier to prohibit people
from approaching the CDB tool.
CAUTION:
Do not perform maintenance or repair on the CDB tool unless the tool
is safely supported or placed in the tool stand and air has been turned off. Injury or
equipment damage can occur with tool not placed in a tool stand and air remaining
on. Place the tool safely in the tool stand and turn off the air before performing
maintenance or repair on the CDB tool.
