ATI Technologies 9105-NET-Axia80-M20-ZC22, Руководство пользователя, Страница: 32 / 94

Manual, F/T Sensor, Ethernet Axia
Document #9610-05-Ethernet Axia-09
Pinnacle Park • 1031 Goodworth Drive • Apex, NC 27539 • Tel:+1 919.772.0115 • Fax:+1 919.772.8259 •
www.ati-ia.com
32
After the displacements, the user point of origin rotates in the following order:
1.
The first rotation is about the X-axis.
•
Recall in this example R
x
= +90° rotation. The user point of origin r90° about the X-axis, in the
following figure.
Figure 4.7—Tool Transformation : Rotation About the X-Axis
The robot side
of the sensor.
The tool side of
the sensor.
Customer tooling
X+
Y+
X+ Axis
after X rotation.
Y+ Axis
after X rotation
Z+
Z+ Axis
after X rotation
2.
The second rotation is about the Y-axis of the new user output reference frame.
•
In this example R
y
= +180° rotation. The user point of origin r180° about the Y-axis of the new
user output reference frame, in the following figure.
Figure 4.8—Tool Transformation: Rotation About the Y-Axis
The robot side
of the sensor.
The tool side of
the sensor.
Customer tooling
X+ Y+
X+ Axis
after X rotation.
Z+ Axis
after Y rotation
Y+ Axis
after Y rotation
Z+
3. The third and final rotation is about the Z-axis of the new user output reference frame.
•
In this example R
Z
= 0° rotation. Therefore, the user point of origin does not rotate any more.
After, the rotations are complete, the final user reference frame of origin is set.