Using the TV Tuner 23
Setting up the TV tuner
Perform these simple steps to set up the TV:
Choose antenna or cable
1
Open the Setup window in TV Tuner mode.
Open the Setup window by clicking on the Setup button
,
pressing Ctrl-S, or right-clicking on the Display.
2
Click the TV Tuner tab.
3
From the drop-down list, select the TV broadcast format
(Antenna or Cable) appropriate to the country you are in.
Set up the audio
Select the sound card connector used for TV audio input:
1
Open the Setup window in TV Tuner mode.
2
Click the Video tab.
3
Click the Audio Input scroll box.
4
Select a sound card connector from the drop-down list.
Scan for available channels
1
Open the Setup window in TV Tuner mode.
2
Click the TV Tuner tab
3
Click the Auto Scan button in the TV Tuner setup dialog.
The TV Tuner scans for all available channels and stores them
when you click the Set button. When scanning is complete, you
can type in a name for each channel.
Validating TV channels
When you click the Auto Scan button in the Tuner setup dialog
(see Tuner in
on page 43), the TV Tuner scans
for all available channels and stores them. When scanning is
complete, you can type in a name for each channel. Before
scanning, use the drop-down list box to select the broadcast
format and the cable standard.
Line-In
MIDI
CD Audio
Line-In
Wave
03TVTuner.fm Page 23 Friday, January 22, 1999 4:38 PM
