Athena 1470-HE EVO, Перевод оригинальной инструкции

Страница: 127 / 196

PAGE
127
Moving the machine (Forwards or backwards)
IMPORTANT: It is not possible to move both tracks at the same time.
If both proportional valves are completely closed, the engine will stop and this
may damage the pumps.
It is possible to move one track at a time only.
1) Completely turn the screw on solenoid valve EV17 (C) anti-clockwise
2) To move the right track, completely turn the screw of solenoid valve EV8
(B) clockwise.
3) Keep pressed, using a special tool, solenoid valve EV11B (Forwards) or
EV11A (backwards).
4) Completely turn the screw on solenoid valve EV8 (B) anti-clockwise
5) To move the left track, completely turn the screw of solenoid valve EV1
(A) clockwise.
6) Keep pressed, using a special tool, solenoid valve EV4A (Forwards) or EV4B
(backwards).
IMPORTANT: The two proportional valves A and B must never be turned anti-
clockwise at the same time but only one of the two.
IMPORTANT: Once the emergency procedure has been completed, the two
screws of solenoid valves A and B must be completely turned anti-clockwise.
The screw of solenoid valve EV17 (C) must be completely turned clockwise.
WARNING: If valve
“
C
”
is not reset in the fully activated position by pressing
and turning it clockwise (you will hear a click), the safety of the machine is
compromised and the platform may overturn.
ATTENTION: Since the operations are performed near the tracks, there is a
risk of crushing