Athena 1090 EVO, Перевод оригинальной инструкции, Страница: 99 / 182

99
Warning: If selector 8 is positioned on DC-S, the function is not active.
4.2.5.4 Proactive Levelling
Note: the Proactive Levelling is active only up to the maximum travel height
allowed, which on this model is 4.5 mt platform floor (6.5 mt work).
This system allows to correct the levelling of the machine when it is at a height,
if after travelling on not perfectly flat ground, the platform is no longer aligned
with the ground itself.
Since the machine can also be levelled with the platform not in the transport
position, another safety ring, both electric and hydraulic, has been added.
The levelling speeds are significantly reduced compared to those with the
machine in the transport position.
This is wanted both to make the manoeuvre comfortable for the operators and
to minimise the effects due to inertia.
This additional system is not required by standard UNI EN 280:2015
because it would be enough to have the normal frame inclination control made
in performance level D as required in section 5.3.2.3 of the same standard.
This additional safety system is described in paragraph 3.4.2 "Redundant frame
inclination and height control device"