Athena 1090 EVO, Перевод оригинальной инструкции, Страница: 26 / 182

26
2.4 Provisions and prohibitions
•
Read this manual carefully before starting, using, servicing or performing
other operations on the machine.
•
The MEWP must always be kept in perfect conditions by following the
maintenance program described in the
Maintenance Chapter .
•
Do not wear rings, wrist watches, jewellery, unfastened or loose clothing
such as neck ties, torn garments, scarves, unbuttoned jackets or garments
with open zip fasteners that could get caught up in moving parts.
•
Wear approved safety garments, such as non-slip footwear and a reflective
vest.
•
To lower the slipping or tripping risk to the minimum, always keep the
operator compartment, platform surfaces, steps, handrails and grip bars
clean and free from all foreign objects or traces of oil, mud and snow
•
Clean the soles of your footwear before getting on the M.E.W.P.
•
THE OPERATOR MUST NOT MOVE BETWEEN THE WORK PLATFORM AND A
STRUCTURE OUTSIDE THE MACHINE; THE MACHINE MAY BECOME
UNSTABLE.
•
THE PERSONNEL AND THE EQUIPMENT MUST ENTER AND EXIT THE WORK
PLATFORM ONLY WITH THE PLATFORM IN THE TRANSPORT POSITION.
•
Do not use the controls or flexible hoses as hand grips
•
Do not lean over the railings around the work platform
•
Warn the persons in charge of maintenance if the machine operates in a
faulty way
•
Make sure that all guards and other protections are positioned correctly and
that all the safety devices are installed and efficient.
•
Do not use the platform in places where there is a risk of explosion or fire
outbreaks.
•
Do not use jets of water or high-pressure washers to clean the platform.
•
It is mandatory for the operator on the platform to use a protective HARD
HAT and attach the special SAFETY HARNESS to the work platform, in
accordance with the current safety laws. The operator on the ground must
also wear a hard-hat.