Athena 1090 EVO, Перевод оригинальной инструкции, Страница: 15 / 182

15
Note: When selling used equipment, this manual and the related attachments
must be included and the manufacturer must be informed of the new owner (
see
Appendix 3 - Transfer of Ownership )
Read carefully Chapter 1 General Information , Chapter 2 Safety information ,
Chapter 3 Description of the Machine and Performance , Chapter 4 Operating
instructions, Chapter 5 Emergency Procedures .
Always consult the relative chapter when using, servicing the machine or when
it is demolished.
1.11 Intended use and improper uses
1.11.1 Intended use
The machine described in this manual is a self-propelled elevating work platform
designed to lift personnel and equipment to perform the following jobs:
•
professional gardening and general work
•
installation of systems and equipment
•
cleaning
•
painting and paint removal
The maximum allowed capacity for model ATHENA 1090 is 300 kg. Consider the
following:
•
2 (two) persons each weighing 80 kg
•
140 kg of equipment
An electronic control system prevents the work platform from lifting to any
position when the load exceeds approx. 20% of the rated load given in the
technical specifications.
The platform was designed and built to be driven only from the console located
on the work platform.
The push-button is of the removable type and can only be used by the operator
to control the platform exclusively in transport position.
The controls on the ground on the rear side are for EMERGENCY use or
MAINTENANCE by qualified personnel.