© Copyright by ATH-Heinl GmbH & Co. KG, 2017, All rights reserved / Misprint and technical changes reserved / Issue: 2017/10
- 8 -
Assembly
1.
Assembly of handle:
a.
First remove the fixing screw (5-5).
b.
Now bring together the two lever elements (5-1-1 & 5-1-2). To bring these elements fully
into the correct position, you must turn the drain wheel (5-2) to bring the internal drain
control bar (5-6) together.
c.
Fix the two elements using the screw (5-5)
d.
Finally, the fixing elements (5-12-1 & 5-12-2) can be connected to one another and fixed by
means of the securing nut (5-17).
2.
Attach the control lever to the jack:
a.
Insert the control lever (5-0) into the support (5-10). For this purpose, the locking rod (5-0)
must also be inserted into one of the three locking holes (6-11).
b.
By turning the drain wheel (5-2), the control lever can be fully inserted into the support (5-
10).
c.
Secure the operating lever by use of the screw (5-11).
3.
Support for adaptors
a.
Use the two U-rails (5-16) and nuts to secure the mount to the control lever with shims (5-
17).
b.
Now the adaptors can be placed in the support and fixed by using the fuse pins (5-18).
5-5
5-1-1
5-1-2
5-2
5-6
5-12-1
5-12-2
5-17
5-10
5-11
5-0
6-11
Содержание WH220
Страница 1: ...USER S MANUAL ATH WH220...