® Urheberrecht ATH-Heinl GmbH & Co. KG, 2017, Alle Rechte vorbehalten. / Druckfehler und technische Änderungen vorbehalten / Stand: 01/2022
- 15 -
4.
Rotate the wheel by hand. As soon as all LEDs of the position indicator outside light up, the weight
can be attached to the outside Fig.4 or in ALU-1 mode Fig. 4.1.
fig.4
fig. 4.1
After the weights have been applied, close the wheel guard arch or press the button
to restart the
balancing process. When the values 0-0 are displayed (see Fig.5), the balancing process has been
successfully completed.
fig.5
-
The displayed result can be recalculated to the corresponding balancing type by pressing the button
.
-
If the wheel was balanced with incorrect values, these values can be corrected. To do this, press
the button
and enter the new a, b, d values. Now press the button
longer, the values
are recalculated and shown in the display.
-
After the balancing process, the values are displayed in 5g or 0.25oz increments, as these are the
usual market sales sizes, when the button
is pressed, the exact values are displayed.
