ATEN VP1420, Руководство пользователя

Страница: 39 / 118

VP1420 / VP1421
User Manual
29
Power LED Indication
The power pushbutton is equipped with an LED that indicates the power status
of the VP1420 / VP1421
. Refer to the table below for the status and supported
tasks for each LED indication.
LED Indication
(Power Pushbutton)
VP1420 / VP1421 Status Tasks
Dim The VP1420 / VP1421 is
powered off. To power on the VP1420 / VP1421, press
the
Power pushbutton/button once.
Flashes orange The VP1420 / VP1421 is
loading system
information. Wait for the unit to finish loading
information.
Orange The VP1420 / VP1421 is
in standby mode. The standby mode is a power-saving
mode that shuts parts of the system down
to allow the user to quickly resume
operation when needed.
To awake the VP1420 / VP1421, press
the
Power pushbutton/button once.
Note: To power off the VP1420 / VP1421
when it is in standby mode, awake the unit
first, and then follow the steps in the next
entry to power off the unit.
Green The VP1420 / VP1421 is
awaken.

To enable the standby mode to
conserve power, press the Power
pushbutton/button once.

To power off the unit:
(1) Press and hold the Power
pushbutton for 3 seconds. A
confirmation message appears in the
OSD.
(2) Press the Power pushbutton
once. The VP1420 / VP1421 powers
off.
Note: The remote control can not be
used to power off the VP1420 /
VP1421.