ATEN VP1420, Руководство пользователя

Страница: 22 / 118

Chapter 2. Hardware Setup
12
Rear View
No. Component Description
1 Ethernet Port Connects to a network switch via an Ethernet cable
to allow remote operation via the web console.
2 IR Receiver Port Connects to an IR receiver to receive IR signals
from the IR remote control.
3 RS-232 Serial
Port Connects to a hardware or software controller to
transmit serial data.
4 Contact In Connects to the Contact Out terminal of a contact
closure interface.
5 LED Out Connects to the LED In terminal of a contact closure
interface
6 Audio In Port Receives an audio source.
7 Audio Out Ports Connects to an active speaker.
8 Cable Tie Slot Reserved for a cable tie to hold the power adapter in
place.
9 PoH Control
Switch Enables the transmission of power along with data
signals to either the Tx or Rx connected to the
VP1421 over an Ethernet cable.
10 Power Jack Receives a power adapter of the VP1421.
11 Source (1) Connects to a VGA source and a stereo audio
source.
12 Source (2) Connects to a source device at a distance via a Tx
device equipped with an HDBaseT port
13 Source (3), (4) Connect to HDMI source devices via HDMI cables.
14 Output/Display A Connects to an HDMI-enabled display device.
4 1 2 3 7
8
9
10 11 12 13 14 15 16
5 6