ATEN VP1420, Руководство пользователя

Страница: 35 / 118

25
Chapter 3
Local Operation
Overview
This chapter provides information on operating the VP1420 / VP1421 using the
front panel and IR remote control.
Note: The instructions use pushbutton to refer to the front panel and button to
refer to the IR remote control.
Operation Considerations

To use the IR remote control, make sure to insert the IR receiver (supplied
in the package) to the VP1420 / VP1421.

To ensure smooth operation using the IR remote control, use the IR remote
control within the effective range (6 m) and keep a clear line-of-sight
between the remote control and the IR receiver connected to the VP1420 /
VP1421.
Switching Sources
To switch the video source on a display:
1. Press a Display Selection pushbutton/button to select a display. The
pushbutton for the selected display lights orange.
2. Press a Source Selection pushbutton/button to assign the source. The
pushbutton for the selected source lights orange.
Note: appears on the top left corner of the OSD for 5
seconds when the source is switched. This is the resolution from the
original source without scaling.